Jump to content

Ken Ulrich

Members
  • Posts

    2,602
  • Joined

  • Last visited

1 Follower

About Ken Ulrich

  • Birthday 04/18/1933

Contact Methods

  • Website URL
    http://
  • ICQ
    0

Profile Information

  • Gender
    Male
  • Location
    Knowlton,Wi and Palmer Alaska
  • Interests
    motorcycles,sidecars,airplanes,model airplanes,metal working( machinist) wood working, beer drinking ( one a day). staying busy. updating MT11 "Sweet Thang" ( silk purse from a sows ear) not silk yet, but getting close. talking to god so that I may take it all with me

Previous Fields

  • My Bike(s)
    MT-11.Dnepr (2) Suzy savage 650 single/velorex hack.... 83' GL100/ural side hack, BMW 75-5,96 solo Ural,250 Ya-ma-who-r Dut bike.

Recent Profile Visitors

1,438 profile views

Ken Ulrich's Achievements

Russian Bike Nut

Russian Bike Nut (3/3)

  1. A true fried passed, Dennis and I shared many a long conversations over the years, he drove up here several times, was always on the move, the last I spoke with him ,he said the doc told him five months, I was about to call him and a few minutes later his wife called. Dennis was the best, i shall always share the moments with him....Ken Ulrich
  2. when you see the old with the new machines and then the tech stuff, you are truely looking at history, each period had its new never to be improved upon developements,if you study it, you have a life time of education. now with the CNC stuff all you do is put the numbers in, the proper material and pop, out come the parts as long as you pay the light bill, like artifical insemiation, all the fun is gone ....Ken
  3. Thanks guys for the welcome back, got aproblem, need to touch with Rich Winters and have lost his phone #, swapping from one system to another can be a grim task, don't know quite how to acess the members file and other things.....thanks in advance.....Ken
  4. There are so many things that can restrict fuel, BUT by pulling the line at the carb, getting a small bottle or ever a small water glass, turn the fuel on and time for 15 seconds the amount of the fuel flow, you can get GOOD IDEA OF WHAT THE PROBLEM IS..Ken
  5. If you have not located one yet contact me at 715- 297-3236, thats my cell.....Regards Ken
  6. At long last have bit the bullet, now have a new Apple computer, that old pos is history. Which means commications will be much easier and no more pop-ups and just pure manure will not grace my screen. Fore long will be clicking off 83 winters and so are going to start moving more parts to folks out there. I just found out that I can't take them all with me....grin.....so if you need parts, I still have a good supply....Waiting for warm weather.....Ken
  7. I sit proudly at the desk once occupied by a POS dell personal computer, that is and has been for about 10 months screwing up life for me.......now.....ta-dah!!! i am pecking away at and on a new apple just out of the box, learning all about it....slowly...still need the nipples? got them here. Just got back from a two week trip to the deep south, feeding bees, and retreiving a MT-16 from the the city of Houston, it is now shivering at -5F here in Wisc., also got the cutest and smartest yorkshire terrier, my son Mark had her, she now rules the farm, am looking for a husband for her, as she is young, about eight months, and the family is running short of puppies. If anyone has a male standard terrier,horny ans good looking, say the word.....Ken
  8. What you describe, is a lean mixture, richen up the idle, see if that improve things, if so a change to a larger main jet will also improve things. a note here, is that a very slight air leak can lean it out significantly at idle, also you are risking a hole piston running that lean......Ken
  9. IMHO a leading link. with an out of round tire and wheel will induce wheel oscillation quicker than any other condition, I concur with Mr Noe.....Ken
  10. you can always tell a Dutchman, but mot very much
  11. Hi Ken Ulrich here, will be in HOU, in a couple weeks, if you still have it, email me at machrat@gmail.com or 715 297-3236 (cell) Thanks Ken
  12. Kids use to be worth 75.00 buck a month, when I was 17,I think the government got screwed on about 25% of them, more like 75% at this time, especially if they are liberal democrats....my head is down low as I head for the big woods.....Ken
  13. Dnepr deep sumps are still available. ....Ken
  14. To those who wish to fit pistons at home a "feeler gauge" will fit them fine. a size of .004 to.005 of inch will give proper clearance, also there must to a end gap on the rings of .013 Minimum, and if you flog it from time to time , a few more thousands, will not hurt a thing. For pressure cooker carbs, go back and make sure that you have at least .004 thousands of valve clearance.......Ken...... Look for a feeler gauge at any auto parts store or machine tool store.
×
×
  • Create New...