FredgSandford Posted January 17, 2022 Report Share Posted January 17, 2022 Hello all, picked up my first and only Dnepr around 2016 when I traded for a 78 vw beetle. Ran rough if at all and until last year I didn’t invest anything but time and sweat pushing it back home. I think it’s mostly a mid 80’s model as it’s Titled in Tennessee as a 2008 build. Picked up two K68 carbs when I bit the bullet and bought a used sidecar out of the Ukraine. Was running dramatically better and I was hunting for more mid range torque when it choked out as I was adjusting and hasn’t started sense. Question: Please recommend a base line to set the K68 carbs too to get it started again. When I switched out the K65’s my throttle cables were too short and I cut and bottomed out the adjuster to get 2-3mm of slack in the cables ( might be my issue) as the K65 idol screw doesn’t exist on the new. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.