fitz Posted January 10, 2022 Report Share Posted January 10, 2022 what carbs do you folks use to replace the k301's on my dnepr 650? seen lots of posts but it all gets to confusing....... pz28's pekar k68's etc etc .... thanks Quote Link to comment Share on other sites More sharing options...
Serious Black Posted January 10, 2022 Report Share Posted January 10, 2022 Mikuni TM28 form Aliexpress. #190 main jet, 5L1 needle (from ebay) #15 idle jet. Take out the air jet. Bob's your uncle and Fanny's your aunty. Quote Link to comment Share on other sites More sharing options...
fitz Posted January 10, 2022 Author Report Share Posted January 10, 2022 will these bolt straight on? what about the cables? thanks Quote Link to comment Share on other sites More sharing options...
Serious Black Posted January 10, 2022 Report Share Posted January 10, 2022 Not a streight bolt on. You need the rubber adapters and to organize your own cables. You might have to fix up new pipes to the air filter box. Quote Link to comment Share on other sites More sharing options...
fitz Posted January 11, 2022 Author Report Share Posted January 11, 2022 what others are there that just bolt on? thanks Quote Link to comment Share on other sites More sharing options...
Serious Black Posted January 11, 2022 Report Share Posted January 11, 2022 K68 or K65. if you HAVE to use Russian carbs try the K65s. A better design that can be assembled in such a way as to make them OK espesially if you get the later float needles without the tiny rubber ring. K68 work but they are fundementally flawed due to the emulsion circuit being disabled. This leads to poor atomisation. There are companies out there that use Keihin. These work well too but are more expensive. Quote Link to comment Share on other sites More sharing options...
fitz Posted January 12, 2022 Author Report Share Posted January 12, 2022 got these coming sellers photo ...can't get it any bigger or right way up Quote Link to comment Share on other sites More sharing options...
Serious Black Posted January 12, 2022 Report Share Posted January 12, 2022 This might be of some use. Jikov - Vergaser Typ 2928 CE fuer URAL IMZ-8_1030--IMZ-8_123.mht Quote Link to comment Share on other sites More sharing options...
fitz Posted January 13, 2022 Author Report Share Posted January 13, 2022 that's handy. the seller told me they should be ready to fit --- but i will give them a clean with some carb cleaner and general tidy up. glad he had the adaptors as well that's a saving lol Quote Link to comment Share on other sites More sharing options...
fitz Posted May 27, 2022 Author Report Share Posted May 27, 2022 just bought some mikuni vm 24 carbs. would i need to change the jets as stated by serious black? or any different ones thanks lads Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.