Ken Ulrich Posted February 11, 2016 Report Share Posted February 11, 2016 At long last have bit the bullet, now have a new Apple computer, that old pos is history. Which means commications will be much easier and no more pop-ups and just pure manure will not grace my screen. Fore long will be clicking off 83 winters and so are going to start moving more parts to folks out there. I just found out that I can't take them all with me....grin.....so if you need parts, I still have a good supply....Waiting for warm weather.....Ken Quote Link to comment Share on other sites More sharing options...
Bum aka cycleshanty.com Posted February 11, 2016 Report Share Posted February 11, 2016 Ken, don't overlook the power of cycleshanty.com for searching or selling parts. If you're a dealer there is even better oppurtunity for you. Bum Quote Link to comment Share on other sites More sharing options...
SafetyBob Posted February 12, 2016 Report Share Posted February 12, 2016 Mr. Ken,So glad you are well... Miss you my friend...Safety Bob Quote Link to comment Share on other sites More sharing options...
sallen Posted February 12, 2016 Report Share Posted February 12, 2016 Hello Ken, Hope you will make CRAP this year. I'll send you a list of needed parts to help pay for your travel.Drag C5paul down with you. Archj from wimington wil be riding with me.Sam Quote Link to comment Share on other sites More sharing options...
waterdawg2004 Posted February 12, 2016 Report Share Posted February 12, 2016 Good to see your back and selling parts again. I am going to replace my 40mm Mikuni carbs with a set of K68 or K65 carbs but I am having a hard time getting information from the sources I can find on ebay and on the internet. They do not seem to know what main jets they have in them or where they are made. So you have any that are set up with the proper jets and adjustmnts? It is for a MT16 Dnepr. Thnks for any help. Buck Quote Link to comment Share on other sites More sharing options...
Serious Black Posted February 14, 2016 Report Share Posted February 14, 2016 Good to here you are doing OK. Know what you mean about the weather. It was sub zero here yesterday and glorious sunshine so I went for a longish run. Thoroughly cold soaked when I got home even with all my good gear on. Quote Link to comment Share on other sites More sharing options...
guzzidude Posted February 14, 2016 Report Share Posted February 14, 2016 Welcome back Ken. Would be great to see you at CRAP if you can make it. Quote Link to comment Share on other sites More sharing options...
Ken Ulrich Posted February 15, 2016 Author Report Share Posted February 15, 2016 Thanks guys for the welcome back, got aproblem, need to touch with Rich Winters and have lost his phone #, swapping from one system to another can be a grim task, don't know quite how to acess the members file and other things.....thanks in advance.....Ken Quote Link to comment Share on other sites More sharing options...
gspell68 Posted March 20, 2016 Report Share Posted March 20, 2016 AWESOME!I've been trying to get in touch with you over the last couple of years. For some reason you cannot receive a PM. gspell68@gmail.com706-409-8307 Quote Link to comment Share on other sites More sharing options...
cjperedina Posted April 7, 2016 Report Share Posted April 7, 2016 Welcome back! I would stock up on parts but I already have a few shelves full and I'm selling my Dnepr (too many vehicles). Quote Link to comment Share on other sites More sharing options...
VWNate1 Posted April 25, 2016 Report Share Posted April 25, 2016 4.24 Late to the party here but WELCOME HOME ken ! . Quote Link to comment Share on other sites More sharing options...
dmb Posted April 28, 2016 Report Share Posted April 28, 2016 havent been around, but back to working on the mt16. hope you and the bees are doing just fine. god bless dennis Quote Link to comment Share on other sites More sharing options...
DneprTim Posted May 9, 2016 Report Share Posted May 9, 2016 That's great Ken. Does that mean I can finally get my final drive back ?after all these years, and all the promises? Anybody thinking about doing business with Ken should email me first asking about my experience .... Quote Link to comment Share on other sites More sharing options...
racepres Posted June 2, 2016 Report Share Posted June 2, 2016 Ken...I cannot get a PM to you. Please check your PM systemI will try e-mail Quote Link to comment Share on other sites More sharing options...
Tubarick Posted June 30, 2016 Report Share Posted June 30, 2016 Hi Ken. Do you have a Russian Ural shock laying around. A friend of mine needs one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.