luca.stere Posted March 11, 2020 Author Report Share Posted March 11, 2020 Mounting the rear fender: The rear rack doesn't fit to the new chinese fender, I have to see why... Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 15, 2020 Author Report Share Posted March 15, 2020 Some problems with the chinese CJ750 exhaust pipes, they have thick material but don't have the right shape. So I had to make some adjustments in order to give the right shape for the pipes. Before: After: On the right side I had to make some cuts because the pipe was to close from the frame, less then 1cm: Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 22, 2020 Author Report Share Posted March 22, 2020 So, I have found out why the M72 rack doesn't fit to CJ750 fender, there is a different mount: Now we have another problem, the rear long mount is too short, so I will cut the mount: And I will make a BMW R71 type mount: Quote Link to comment Share on other sites More sharing options...
js69 Posted March 23, 2020 Report Share Posted March 23, 2020 Hey Luca, looks good!For mine, I decided to use the M72 style for the fender holder.One long 10mm round bar bent with the attachments welded on: Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 23, 2020 Author Report Share Posted March 23, 2020 One long 10mm round bar bent with the attachments welded on: You have a nice shape for the holder, the ChangJiang one is very ugly. Quote Link to comment Share on other sites More sharing options...
js69 Posted March 23, 2020 Report Share Posted March 23, 2020 This was the holder that was on before.Lots of changs have the holder attached to the bottom of the shock but in a straight line. Not sure how the orginal looked like. Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 24, 2020 Author Report Share Posted March 24, 2020 This was the holder that was on before.Lots of changs have the holder attached to the bottom of the shock but in a straight line. Not sure how the orginal looked like. The original holder for M72 is this one: Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 29, 2020 Author Report Share Posted March 29, 2020 Building the rear mount for the short fender: Reinforcing the hinges: Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 29, 2020 Author Report Share Posted March 29, 2020 This is the BMW R71 mount type for the short rear fender, it is not an exact copy but for the moment it will do the job: Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 29, 2020 Author Report Share Posted March 29, 2020 I have chosen to mount a chinese lamp which is a copy of Zundapp I believe for the sidecar lamp. I have also an original lamp (the one from the right) but I like more this design: I made the marks for the holes: And this is it: Quote Link to comment Share on other sites More sharing options...
Vance Blosser Posted March 29, 2020 Report Share Posted March 29, 2020 Impressive work! Quote Link to comment Share on other sites More sharing options...
racepres Posted March 29, 2020 Report Share Posted March 29, 2020 Impressive work!So... Going to be Stunning!!! Quote Link to comment Share on other sites More sharing options...
js69 Posted March 29, 2020 Report Share Posted March 29, 2020 Stick welding a fender requires some good skills. Nicely done. Quote Link to comment Share on other sites More sharing options...
luca.stere Posted March 30, 2020 Author Report Share Posted March 30, 2020 I had mounted a rear reflector, I have also an original one but I did not choose that one and I will keep it for another project (a restauration). A friend of mine gave me a reflector from an old russian bike and it has the same dimension for the glass reflector. But what I did liked more at this one is the simplicity of design, it looks more military to me: Sdelano V URSS (made in russia): Quote Link to comment Share on other sites More sharing options...
luca.stere Posted April 3, 2020 Author Report Share Posted April 3, 2020 New front fender from Ural-Zentrale, it will be low mounted style. In order to do that I will have to make the necessary mounts: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.