Search the Community
Showing results for tags 'MT16'.
Found 4 results
fuel trouble Dnepr MT 16
HJKO posted a topic in Dneprs, Urals, etc. - Pre 2001Hi guys/ladies, First time on the forum as I just bought me a 1995 Dnepr MT16 and from day 1 it seems I have trouble with the fuel supply to my carbs (K68). For some reason the fuel is not running into to filter house (first only on the right side, but now also on the left side!). But when checking the hoses and the fuel valve on the tank everything seems to be working fine. Fuel is freely running when disconnected from the fuel valve on the tank (with and without fuel filling opening covered), every hose is clean. The filters are not that clean, but I would expect the fuel to run down into the filterhouse even is the filter element should have been completely blocked. The day I got this bike I had problems this the fuel supply to the right carburetor, but I could drive with it. When running idle the motor would stopp after a long time running on idle. This problem disappeared when raising the rmp´s. So I drove it with a rather amount of RPM´s. I borrowed som carb tuning equipment to check my Idle balance. But now I do not get the bike startet due to missing fuel. Is there anybody out here who can help me with some good suggestions where to look to solve this problem? Looking forward to get this bike on the road...... Henk
FS: Texas titled MT-16 non-running
msauls posted a topic in Owner ClassifiedSOLD Looking to unload some projects, and hopefully this one can find a nice home. MT-16 Imported in 2005, ridden, neglected- I picked up in 2012. (see link below for condition) Titled to be road legal in Texas, all documentation included. It has not been transferred to my name, but if that is an issue I am more than happy to put it in my name before selling it. Posted on its condition and issues here: http://www.russianir...showtopic=14299 Bike was stored inside- in this shop since these photos were taken. I am moving shops and need the space. Pretty much how it sits now. Engine out- Jugs off. Tub and tank removed, rolling chassis. Salvageble parts collected and separated. Also will include a decent sized order of new seals, bearings, gaskets, filters (~100$) from Moto-Boxer. If there is any interest, I can provide additional photos (from what is in the thread). Also, I'm located just east of downtown in Houston if anyone wants to view. Asking 800$ Thanks- firstname.lastname@example.org
Dnepr 650 Heads - misc valves & springs - $50
uraltourist posted a topic in Owner ClassifiedSome time ago my MT16 had a piston failure, which pretty much destroyed the motor. I wound up replacing most of the internal parts. The left head was dinged up a bit and I decided to replace both heads. It is time to clean out some of the spare parts I accumulated. What you see is what you get, the left head may be OK, the right is fine. I am including a mismatched set of valves and the springs to make it more or less complete. I think $25 should cover shipping within the Continental US. The right head should be plug and play with a valve grind, the left will need some love. I will leave this up through the week, they go on Flea Bay on Friday May 9th....
Fun Dnepr MT9/16 Rocker Covers on Ebay
Pete Swede posted a topic in Russian Motorcycle WorldFound these on fleabay... http://www.ebay.co.uk/itm/DNEPR-MT9-16-PAIR-OF-ROCKER-COVERS-SKULLS-UKRAINE-A-BIT-OF-FUN-/291005381757?pt=UK_Motorcycle_Parts_13&hash=item43c145bc7d